Description
Product
Specs
Buyers
Guide
FAQ's
DownloadsProduct Description
Our new calipers are manufactured using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. As a direct-fit component, our new zinc coated calipers provide hassle-free installation and long-term reliability.
Complete the Check It Fits tool and confirm all information in the Fitment Details section above to ensure you select the right part for your application.
Metafield Product & Technical
Can I switch out a Phenolic Piston Caliper for a Steel Piston Caliper or vice versa?
Not recommended. The O.E. manufacturers specified steel or phenolic pistons based on the intended use of the vehicle. It is recommended that the installer follow the manufacturer’s recommendations.What type of fluid should I use: DOT 3, DOT 4, or DOT 5?
As a rule, always use brake fluid recommended by O.E. The fluid type is stamped on the master cylinder reservoir lid. Always use new fluid in a sealed container.Brakes squeal all of the time. What's causing the squeal?
Brake squeal can be caused by improper installation of the brake pads, improperly installed brake hardware and improper brake rotor finish.Car pulls to one side during braking. Why?
Inspect both calipers for binding or sticky slides or pins. Also ensure that brake hoses are not collapsed or restricted and inspect steering/suspension components for proper operation.What type of grease is used on floating caliper mounting pins?
A silicone grease is used on floating caliper mounting pins.Do all of your Calipers come with the new hardware and a mounting bracket for installation?
New hardware is included with all of our Calipers however the mounting bracket is an added option depending on part number and application. Mounting Brackets are also sold separately for most applications.Could calipers be the cause of a low brake pedal?
A symptom of a low brake pedal is usually caused by air in the system, misadjusted rear brake shoes, deteriorated brake hose(s) or a defective master cylinder.Warranty Policy
Installation & Tech Checks
Core Policy
ProTech Bulletins
General
pdm:general_part_type:
Disc Brake Caliper
pdm:general_product_condition:
New
Life Cycle Status:
Obsolete
pdm:general_package_contents:
Caliper; Instruction Sheet; Bracket; Hardware Kit
pdm:general_package_weight:
7.80 lb
UPC:
00884548294462
pdm:general_e_waste:
No
pdm:general_warranty:
Limited Lifetime
*A warranty must be returned to the parts supplier where the CARDONE product was
purchased and is subject to that part store's terms & conditions. If the parts retailer offers a
different warranty than the CARDONE warranty, the retailer’s policy will prevail.
Technical
Bleeder Port Size:
M10x1.0
Color:
Silver
Finish:
Zinc Plated
Inlet Port Size:
M10x1.0
Mounting Bolts Included:
No
Pads Included:
No
Piston Material:
Steel
Piston Quantity:
1
Piston Size OD - Imperial:
1.89 in
Piston Size OD - Metric:
48.03 mm
pdm:Abutment Clips Included:
No
pdm:Anti-Rattle Spring Included:
Yes
pdm:Bleeder Screw Included:
Yes
pdm:Bleeder Screw Quantity:
1
pdm:Bleeder Thread Size:
M10x1.0
pdm:Bracket Included:
Yes
pdm:Caliper Color:
Silver
pdm:Caliper Finish:
Zinc Plated
pdm:Caliper Slides Included:
Yes
pdm:Caliper Type:
Floating
pdm:Disc Brake Caliper Casting Material:
Cast Iron
pdm:Grade Type:
Regular
pdm:Inlet Fitting Type:
Banjo
pdm:Inlet Port Size:
M10x1.0
pdm:Mounting Bolt Included:
No
pdm:Mounting Bracket Included:
Yes
pdm:Mounting Hardware Included:
Yes
pdm:Mounting Hole Diameter:
0.472 IN
pdm:Mounting Hole Thread Diameter:
0.472 IN
pdm:Pad Wear Sensor Included:
Yes
pdm:Pads Included:
No
pdm:Piston Diameter:
1.89 IN
pdm:Piston Diameter:
48.03 MM
pdm:Piston Material:
Steel
pdm:Piston Quantity:
1
pdm:Rust Resistant Coating:
Yes
General
Part Type:
Brake Caliper
Product Condition:
New
Lifecycle Status:
Available to Order
Package Contents:
Caliper; Instruction Sheet; Bracket; Hardware Kit
Packaged Weight:
7.8000 lb
E-Waste:
No
Warranty:
Limited Lifetime
*A warranty must be returned to the parts supplier where the CARDONE product was
purchased and is subject to that part store's terms & conditions. If the parts retailer offers a
different warranty than the CARDONE warranty, the retailer’s policy will prevail.
Technical
Bleeder Port Size:
M10x1.0
Color:
Silver
Finish:
Zinc Plated
Inlet Port Size:
M10x1.0
Installation Hardware Included:
Yes
Mounting Bolts Included:
No
Pads Included:
No
Piston Material:
Steel
Piston Quantity:
1
Piston Size OD - Imperial:
1.89 in
Piston Size OD - Metric:
48.03 mm
pdm:Abutment Clips Included:
No
pdm:Anti-Rattle Spring Included:
Yes
pdm:Bleeder Screw Included:
Yes
pdm:Bleeder Screw Quantity:
1
pdm:Bleeder Thread Size:
M10x1.0
pdm:Bracket Included:
Yes
pdm:Caliper Color:
Silver
pdm:Caliper Finish:
Zinc Plated
pdm:Caliper Slides Included:
Yes
pdm:Caliper Type:
Floating
pdm:Disc Brake Caliper Casting Material:
Cast Iron
pdm:Grade Type:
Regular
pdm:Inlet Fitting Type:
Banjo
pdm:Inlet Port Size:
M10x1.0
pdm:Mounting Bolt Included:
No
pdm:Mounting Bracket Included:
Yes
pdm:Mounting Hardware Included:
Yes
pdm:Mounting Hole Diameter:
0.472 IN
pdm:Mounting Hole Thread Diameter:
0.472 IN
pdm:Pad Wear Sensor Included:
Yes
pdm:Pads Included:
No
pdm:Piston Diameter:
1.89 IN
pdm:Piston Diameter:
48.03 MM
pdm:Piston Material:
Steel
pdm:Piston Quantity:
1
pdm:Rust Resistant Coating:
Yes
