Product Description
Our new calipers are manufactured using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. As a direct-fit component, our new zinc coated calipers provide hassle-free installation and long-term reliability.
Complete the Check It Fits tool and confirm all information in the Fitment Details section above to ensure you select the right part for your application.
Year
Make
Model
Engine
QualifierText
Position
1991
Toyota
4Runner
2.4L
Before 06/1991
Installation Hardware Included
with Metal Piston
Obsolete
Front Right
1989
Toyota
4Runner
2.4L
From 04/01/1989
Installation Hardware Included
with Metal Piston
Obsolete
Front Right
1990
Toyota
4Runner
2.4L
Installation Hardware Included
with Metal Piston
Obsolete
Front Right
1989
Toyota
4Runner
3.0L
Before 04/1989
Installation Hardware Included
with Metal Piston
Obsolete
Front Right
1991
Toyota
4Runner
3.0L
Before 06/1991
Installation Hardware Included
with Metal Piston
Obsolete
Front Right
1989
Toyota
4Runner
3.0L
From 04/01/1989
Installation Hardware Included
with Metal Piston
Obsolete
Front Right
1988, 1990
Toyota
4Runner
3.0L
Installation Hardware Included
with Metal Piston
Obsolete
Front Right
1989 - 1995
Toyota
Pickup
2.4L
Installation Hardware Included
with Metal Piston
Obsolete
Front Right
1988 - 1995
Toyota
Pickup
3.0L
Installation Hardware Included
with Metal Piston
Obsolete
Front Right
Product & Technical
What type of fluid should I use: DOT 3, DOT 4, or DOT 5?
As a rule, always use brake fluid recommended by O.E. The fluid type is stamped on the master cylinder reservoir lid. Always use new fluid in a sealed container.Can I switch out a Phenolic Piston Caliper for a Steel Piston Caliper or vice versa?
Not recommended. The O.E. manufacturers specified steel or phenolic pistons based on the intended use of the vehicle. It is recommended that the installer follow the manufacturer’s recommendations.Could calipers be the cause of a low brake pedal?
A symptom of a low brake pedal is usually caused by air in the system, misadjusted rear brake shoes, deteriorated brake hose(s) or a defective master cylinder.Car pulls to one side during braking. Why?
Inspect both calipers for binding or sticky slides or pins. Also ensure that brake hoses are not collapsed or restricted and inspect steering/suspension components for proper operation.Brakes squeal all of the time. What's causing the squeal?
Brake squeal can be caused by improper installation of the brake pads, improperly installed brake hardware and improper brake rotor finish.What type of grease is used on floating caliper mounting pins?
A silicone grease is used on floating caliper mounting pins.Do all of your Calipers come with the new hardware and a mounting bracket for installation?
New hardware is included with all of our Calipers however the mounting bracket is an added option depending on part number and application. Mounting Brackets are also sold separately for most applications.Warranty Policy
Installation & Tech Checks
Core Policy
ProTech Bulletins
General
part type:
Disc Brake Caliper
product condition:
New
Life Cycle Status:
Obsolete
package contents:
Caliper; Instruction Sheet; Hardware Kit
package weight:
11.90 lb
UPC:
00884548336193
e waste:
No
warranty:
Limited Lifetime
*A warranty must be returned to the parts supplier where the CARDONE product
was
purchased and is subject to that part store's terms & conditions. If the parts retailer offers a
different warranty than the CARDONE warranty, the retailer’s policy will prevail.
OE Numbers
Toyota
4773035040, 4773035080
Technical
Bleeder Port Size:
M10x1.0
Color:
Silver
Finish:
Zinc Plated
Inlet Port Size:
M10x1.0
Mounting Bolts Included:
No
Pads Included:
No
Piston Material:
Steel
Piston Quantity:
4
Piston Size OD - Imperial:
1.68 in
Piston Size OD - Metric:
42.77 mm
Abutment Clips Included:
No
Anti-Rattle Spring Included:
Yes
Bleeder Screw Included:
Yes
Bleeder Screw Quantity:
1
Bleeder Thread Size:
M10x1.0
Bracket Included:
No
Caliper Color:
Silver
Caliper Finish:
Zinc Plated
Caliper Slides Included:
No
Caliper Type:
Fixed
Disc Brake Caliper Casting Material:
Cast Iron
Grade Type:
Regular
Inlet Fitting Type:
Flare
Inlet Port Size:
M10x1.0
Mounting Bolt Included:
No
Mounting Bracket Included:
No
Mounting Hardware Included:
Yes
Mounting Hole Diameter:
0.481 IN
Mounting Hole Thread Diameter:
0.481 IN
Pad Wear Sensor Included:
Yes
Pads Included:
No
Piston Diameter:
1.68 IN
Piston Diameter:
42.77 MM
Piston Material:
Steel
Piston Quantity:
4
Rust Resistant Coating:
Yes