Customers: The transition from MyCARDONE to the new CARDONE.com is underway. Watch your email!

Transfer Case Motor - 48-1001

PART NUMBER:
48-1001

PART TYPE:
Transfer Case Motor
Transfer Case Motor - 48-1001
WHERE TO BUY
Click for more info Remanufactured products only require 15-20% of the total energy and material it takes to manufacture new parts while keeping usable cores out of landfills.
Click for more info CARDONE's skilled technicians and engineers can completely rebuild your part and return it to you, good as new. Learn More.

Product Description

CARDONE Remanufactured Transfer Case Motors are designed to meet or exceed O.E. performance. Reverse engineering provides insight into how and why the unit originally failed, allowing our engineers to identify and correct original design weaknesses. Each unit is 100% computer tested at three points during the remanufacturing process to ensure reliability. CARDONE is committed to getting your vehicle back to peak performance with our direct-replacement transfer case motors.


  • All motors are 100% torque tested to ensure strength for proper gear engagement.
  • Each unit is 100% computer tested at 3 points during the remanufacturing process for guaranteed performance.
  • Every motor is assembled with the precise amount of lubricant to ensure quiet operation and long life.
  • Motor magnets are 100% recharged for superior performance and reliability.
  • Transfer case motor sensors are 100% replaced with new, O.E.-quality sensors for superior performance and long product life.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.

    • Product & Technical

    The replacement motor drive is in a different position, can I reposition before installing?
    Do not operate the motor while it is off the transfer case. This can damage the motor and set an error code that must be cleared before the motor will operate again. Shift the transfer case into the position of the motor to install.


    Can I install the replacement motor if my Transfer Case motor failed in 4 Wheel Drive Low or High?
    Yes, the transfer case should be manually shifted into the two-wheel drive position at the shift shaft before the installation of the replacement motor. Typically the positions are spring-loaded and can be rotated manually.


    What tool can I use to manually shift the transfer case into the two-wheel drive position before I install the replacement motor?
    A crescent wrench can be used for this operation.


    What drivetrain position is the replacement motor drive placed in?
    The replacement motor drive is factory-set in the 2 wheel drive position.


    The Service 4WD light is on and/or the 4WD is inoperative. What could cause this condition?
    This may be caused by a transfer case control module calibration issue. Check for DTC's and calibration version − there may be a software update from the Original Equipment Manufacturer.


    If the motor attempts to shift, but sounds weak, check the front axle lock actuator. If the axle lock does not engage, the motor cannot complete its engagement.


    Warranty Policy

    Installation & Tech Checks

    Core Policy

    ProTech Bulletins

    General

    pdm:general_part_type:
    Transfer Case Motor
    Life Cycle Status:
    Available to Order
    pdm:general_package_weight:
    2.85 lb
    UPC:
    00082617755894

    Technical