Customers: The transition from MyCARDONE to the new CARDONE.com is underway. Watch your email!

Rack and Pinion Assembly - 1G-1017

PART NUMBER:
1G-1017

PART TYPE:
Rack and Pinion Assembly
WHERE TO BUY
Click for more info Remanufactured products only require 15-20% of the total energy and material it takes to manufacture new parts while keeping usable cores out of landfills.
Click for more info CARDONE's skilled technicians and engineers can completely rebuild your part and return it to you, good as new. Learn More.

Product Description

Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.

  • 100% replacement of rubber sealing components.
  • Application of specialized lubricant(s) for extended life.
  • Finished in protective coating to prevent corrosion and rust.
  • Each unit undergoes a factory test drive, simulating extreme operating conditions while verifying all on-car communications.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.

Complete the Check It Fits tool and confirm all information in the Fitment Details section above to ensure you select the right part for your application.

Metafield Product & Technical

Core

What is a core?

A core is a used automotive part that is returned to the remanufacturer instead of being scrapped.

Why return cores?

Cores are literally at the “core” of the remanufacturing process, because they are the raw material used to start the remanufacturing process. That’s why remanufacturers buy cores back from customers, and they pay the most for good quality cores. If a core has too much damage in key areas, it may be unusable or require extra resources to process; therefore a reduced core payment may be awarded. This core policy explains potential deductions that may be taken from the core price if certain components are missing or damaged.

What is remanufacturing?

Remanufacturing is the process of taking used parts, completely disassembling and thoroughly cleaning them, replacing the worn components with original quality components, and restoring them to their original function. Every unit is 100% tested to ensure O.E. performance.

Why “reman”?

PRODUCTS - Reman captures used, durable goods like auto parts and puts them “back on the road” to new and sometimes better than new performance. Reman provides the opportunity for detection of common failure modes and incorporation of design improvements to prevent repeat failure.

ECONOMY - Reman products cost consumers about 40% less than new. Reman products are one of the few “green” products that actually costs less than their “non-green” counterparts.


ENVIRONMENTAL - Reman saves up to 86% of the energy required to build a new unit. Reman realizes Greenhouse Gas savings of up to 25 lbs. per unit over new. Reman saves up to 85% of the raw material required to produce a new unit by reusing existing products. Reman is even more sustainable than recycling, as product castings are preserved rather than melted down to raw material, saving energy and reducing emissions.

Warranty Policy

Installation & Tech Checks

Core Policy

ProTech Bulletins

General

Part Type:
Rack and Pinion Assembly
Product Condition:
Remanufactured
Lifecycle Status:
Available to Order
Package Contents:
Rack and Pinion; Instruction Sheet
Packaged Weight:
18.5000 lb
E-Waste:
NO
Warranty:
3 Year/36,000 Mile
*A warranty must be returned to the parts supplier where the CARDONE product was purchased and is subject to that part store's terms & conditions. If the parts retailer offers a different warranty than the CARDONE warranty, the retailer’s policy will prevail.

Technical

Bellows Color:
BLACK
Casting Material:
ALUMINUM
Color or Finish:
BLACK
Distance Between Mounting Holes - Imperial:
18.19 in
Distance Between Mounting Holes - Metric:
461.96 mm
Gasket or Seal Included:
NO
Grade Type:
Regular
Input Shaft Diameter - Imperial:
0.84 in
Input Shaft Diameter - Metric:
21.41 mm
Input Shaft Length - Imperial:
3.13 in
Input Shaft Length - Metric:
79.38 mm
Installation Hardware Included:
no
Mounting Bracket Included:
NO
Number of Mounting Holes:
2
Outer Tie Rods Included:
NO
Rack Length - Imperial:
49.75 in
Rack Length - Metric:
1263.65 mm
Thread Length - Imperial:
2.277 in
Thread Length - Metric:
57.83 mm
Tie Rod Ends Included:
Yes
Total Turns Lock to Lock:
2.44
Type:
Manual