Description
Product
Specs
Buyers
Guide
FAQ's
DownloadsProduct Description
Power steering pulleys are an important component in the drive system for belt-driven steering pumps and should be replaced during any power steering pump service. CARDONE New Power Steering Pulleys are manufactured using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. As a direct-fit component, each pulley installs easily, saving precious labor time while providing peace of mind. In an industry where time is such a valuable commodity, CARDONE strives to help make sure your time is spent wisely.
Complete the Check It Fits tool and confirm all information in the Fitment Details section above to ensure you select the right part for your application.
Product & Technical
How important is belt condition and tension?
The age and continual flexing of a belt will cause it to crack and deteriorate. Stretching loosens the belt, causing it to slip on the pulleys. A cracked belt will eventually break. The tension and general condition of the belt should be checked periodically.Are there any special tools needed to remove and install the pulley?
Yes, use of the correct tool based on engine application and pulley type is necessary to prevent damage to the pulley.How far should the replacement pulley be pressed on the shaft for correct alignment with the other accessory pulleys?
The replacement pulley should be pressed to the point where the hub is flush with the end of the shaft.How can I check to see if the replacement pulley is aligned with the adjacent accessory pulleys?
Accessory pulley alignment should be checked using a straightedge if a pulley alignment issue is suspected. The straightedge should lie flat across the fascia of two adjacent pulleys. If the straightedge does not lie flat, then one of the pulleys is misaligned. To validate which of the pulleys is causing the issue, check each against other pulleys until you isolate the one that is out of line. Pulley alignment can also be checked with a laser alignment tool.Do you powder coat your pulleys?
Pulleys are painted with weather resistant epoxy paint.What type of material are pulleys made of?
Pulleys are typically made of plastic composite nylon or steel.What are the different types of pulley designs?
Flat, V-belt, and Multi groove.Warranty Policy
Installation & Tech Checks
Core Policy
ProTech Bulletins
General
pdm:general_part_type:
Power Steering Pump Pulley
pdm:general_product_condition:
New
Life Cycle Status:
Available to Order
pdm:general_package_contents:
Pulley
pdm:general_package_weight:
1.40 lb
UPC:
00884548283831
pdm:general_e_waste:
No
pdm:general_warranty:
Limited Lifetime
*A warranty must be returned to the parts supplier where the CARDONE product
was
purchased and is subject to that part store's terms & conditions. If the parts retailer offers a
different warranty than the CARDONE warranty, the retailer’s policy will prevail.
Technical
Belt Type:
Serpentine
Belt Width:
23.10 mm
Color:
Black
Groove Quantity:
4
Item Grade:
Standard Replacement
Mount Type:
Press-Fit
Mounting Hole Quantity:
1
Outside Diameter - Imperial:
4.82 in
Shaft Diameter - Metric:
16.84 mm
pdm:Belt Type:
Serpentine
pdm:Bore Diameter:
0.658 IN
pdm:Bore Diameter:
16.84 MM
pdm:Color:
Black
pdm:Finish:
Black Steel
pdm:Groove Quantity:
4
pdm:Material:
Steel
pdm:Mount Type:
Press-Fit
pdm:Mounting Hardware Included:
No
pdm:Mounting Hole Quantity:
1
pdm:Outside Diameter:
4.818 IN
pdm:Outside Diameter:
122.38 MM
pdm:Shaft Diameter:
0.658 IN
pdm:Shaft Diameter:
16.84 MM
pdm:Width:
23.11 MM
pdm:Width:
0.91 IN
