
Product Description
Building on decades of experience using reverse engineering to remanufacture power steering products, CARDONE engineers have meticulously designed and tested our CARDONE New Power Steering Pumps to fit and perform like the original. Each unit is supplied with premium high-temperature seals for reliability you can count on.
Product & Technical
Why do I still have hard steering in one direction after I replaced the pump?
The problem is most likely in the steering unit−the pump does not know left from right. Check for binding steering components and repair as necessary.Why is the pump making a whining noise all of the time?
A whining pump is usually caused by air in the power steering system. Inspect the reservoir for proper fluid level. If fluid has foam or air bubbles present, air has entered the system or has not been properly bled (ensure all hoses/clamps are tight). Some systems require special vacuum bleeding procedures.I bought a replacement power steering pump and my original pulley has a loose fit on the replacement pump shaft. What should I do?
The pulley may have cracked upon removal. If the shaft was mushroomed before removing the pulley, it has now enlarged the bore in the pulley. The pulley must be replaced.Should I ever change my fluid, even though nothing is wrong?
Yes. Some O.E. manufacturers recommend that power steering fluid be changed at 50,000 miles and continue at that interval. Just like engine oil, power steering fluid will eventually break down and carry suspended contaminants from component wear and breakdown. Follow your vehicle's O.E. manufacturer's recommendations on fluid change intervals.I only have assist when increasing engine rpm after installing the replacement pump. What's causing this?
There may be debris in the flow control valve bore not allowing the flow control valve to move as it should. (Valve and bore are located behind the high pressure fitting on the pump). The system must be checked for contamination and flushed.Warranty Policy
Installation & Tech Checks
Core Policy
ProTech Bulletins
General
pdm:general_part_type:
Power Steering Pump
pdm:general_product_condition:
New
Life Cycle Status:
Available to Order
pdm:general_package_contents:
Hydraulic Pump; Instruction Sheet; Sealing Kit
pdm:general_package_weight:
4.24 lb
UPC:
00884548362017
pdm:general_e_waste:
Yes
pdm:general_warranty:
Limited Lifetime
*A warranty must be returned to the parts supplier where the CARDONE product
was
purchased and is subject to that part store's terms & conditions. If the parts retailer offers a
different warranty than the CARDONE warranty, the retailer’s policy will prevail.
Technical
pdm:Filter Included:
No
pdm:Hose Port Type:
Washer
pdm:Housing Material:
Aluminum
pdm:Inlet Attachment Type:
Barb
pdm:Inlet Diameter:
0.749 IN
pdm:Inlet Quantity:
1
pdm:Mounting Hardware Included:
No
pdm:Outlet Attachment Type:
Threaded
pdm:Outlet Quantity:
1
pdm:Outlet Thread Size:
20x1.5
pdm:Pulley Attachment Type:
Press-On
pdm:Pulley Belt Type:
Serpentine
pdm:Pulley Included:
Yes
pdm:Remote Reservoir:
Yes
pdm:Remote Reservoir Included:
No
pdm:Reservoir Cap Included:
No
pdm:Reservoir Included:
No
pdm:Shaft Type:
Press-On
pdm:Type:
Hydraulic