Description
Product
Specs
FAQ's
Downloads
Remanufactured products only require 15-20% of the total energy and material it takes to manufacture
new parts while keeping usable cores out of landfills.
CARDONE's skilled technicians and engineers can completely rebuild your part and return it to you,
good as new. Learn More.
Product Description
CARDONE remanufactured Electrohydraulic Power Steering Pumps (EHPS) are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.
Product & Technical
Why use EHPS pumps over the traditional belt driven power steering pumps?
Automobile manufacturers are favoring EHPS pumps because they result in better performance and fuel economy. EHPS pumps eliminate the belt and pulley rotational mass that a traditional pump would require.What does an EHPS pump consist of?
An EHPS pump consists of an electronic motor and a hydraulic pump. The electronic motor generates the required RPMs for the pump to produce flow and pressure to supply the power steering system.What is needed for an EHPS pump to function?
Unlike traditional power steering pumps, the EHPS pumps require a 12-volt power supply. Most EHPS pumps will also require communication with an external module.Can an EHPS pump be serviced?
Most automobile manufactures do not recommend servicing individual components of an EHPS pump. These pumps are replaced as complete units.Can regular power steering fluid be used for EHPS systems?
No. You must use the correct fluid specified in the O.E. service manual or owner’s manual of the vehicle being serviced.Where is an EHPS pump usually located?
An EHPS pump has a different appearance than a traditional power steering pump and is usually mounted on the passenger side behind the front bumper.Will the power steering fluid need to be flushed?
Yes. The hydraulic system must be flushed according to the O.E. service intervals. Failure do to so can cause premature damage to the EHPS pump and other power steering components.Will the system need to be bled after replacing an EHPS pump?
Yes, a bleeding procedure must be performed, just like a traditional belt-driven power steering system.
Core
What is a core? A core is a used automotive part that is returned to the remanufacturer instead of being scrapped. Why return cores? Cores are literally at the “core” of the remanufacturing process, because they are the raw material used to start the remanufacturing process. That’s why remanufacturers buy cores back from customers, and they pay the most for good quality cores. If a core has too much damage in key areas, it may be unusable or require extra resources to process; therefore a reduced core payment may be awarded. This core policy explains potential deductions that may be taken from the core price if certain components are missing or damaged. What is remanufacturing? Remanufacturing is the process of taking used parts, completely disassembling and thoroughly cleaning them, replacing the worn components with original quality components, and restoring them to their original function. Every unit is 100% tested to ensure O.E. performance. Why “reman”? PRODUCTS - Reman captures used, durable goods like auto parts and puts them “back on the road” to new and sometimes better than new performance. Reman provides the opportunity for detection of common failure modes and incorporation of design improvements to prevent repeat failure.ECONOMY - Reman products cost consumers about 40% less than new. Reman products are one of the few “green” products that actually costs less than their “non-green” counterparts.
ENVIRONMENTAL - Reman saves up to 86% of the energy required to build a new unit. Reman realizes Greenhouse Gas savings of up to 25 lbs. per unit over new. Reman saves up to 85% of the raw material required to produce a new unit by reusing existing products. Reman is even more sustainable than recycling, as product castings are preserved rather than melted down to raw material, saving energy and reducing emissions.
Warranty Policy
Installation & Tech Checks
Core Policy
ProTech Bulletins
General
pdm:general_part_type:
Power Steering Pump
pdm:general_product_condition:
Remanufactured
Life Cycle Status:
Available to Order
pdm:general_package_contents:
Electronic Hydraulic Power Steering Pump; Sealing Kit
pdm:general_package_weight:
13.50 lb
UPC:
00884548112704
pdm:general_e_waste:
Yes
Technical
Cap Included:
Yes
Hose Port Type:
O-Ring
Outlet Attachment Type:
Bolt-on
Outlet Inside Diameter:
0.43
Outlet Quantity:
1
Power Steering Pump Inlet Attachement Type:
Barb
Pulley Included:
No
Remote Reservoir:
No
Reservoir Included:
Yes
pdm:Filter Included:
No
pdm:Hose Port Type:
O-ring
pdm:Housing Material:
Aluminum; Plastic
pdm:Inlet Attachment Type:
Barb
pdm:Inlet Diameter:
10.21 MM
pdm:Inlet Diameter:
0.402 IN
pdm:Inlet Quantity:
1
pdm:Mounting Hardware Included:
No
pdm:Outlet Attachment Type:
Bolt-On
pdm:Outlet Quantity:
1
pdm:Pulley Included:
No
pdm:Remote Reservoir:
No
pdm:Remote Reservoir Included:
No
pdm:Reservoir Cap Included:
Yes
pdm:Reservoir Included:
Yes
pdm:Type:
Hydraulic