Customers: The transition from MyCARDONE to the new CARDONE.com is underway. Watch your email!

Power Steering Pump - 1H-20001

PART NUMBER:
1H-20001

PART TYPE:
Power Steering Pump
Power Steering Pump - 1H-20001
WHERE TO BUY
Click for more info Remanufactured products only require 15-20% of the total energy and material it takes to manufacture new parts while keeping usable cores out of landfills.
Click for more info CARDONE's skilled technicians and engineers can completely rebuild your part and return it to you, good as new. Learn More.

Product Description

CARDONE remanufactured Electrohydraulic Power Steering Pumps (EHPS) are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.


  • During the engineering phase, every unit is tested to ensure perfect fit and function on the vehicle.
  • All critical components (cam packs, armature, reservoir, etc.) are tested to match O.E. performance standards.
  • All units are built with 100% new, O.E.-quality O-rings, seals, bearings and gaskets.
  • Shafts and surfaces are machined to precise specifications to eliminate premature wear and extend product life.
  • Weak solder points are 100% reflowed to extend life expectancy.
  • To ensure reliable performance, final assembly is computer-tested to measure pressure, bypass, fluid flow, steering effort, current and noise.

    • Product & Technical

    What does an EHPS pump consist of?
    An EHPS pump consists of an electronic motor and a hydraulic pump. The electronic motor generates the required RPMs for the pump to produce flow and pressure to supply the power steering system.


    What is needed for an EHPS pump to function?
    Unlike traditional power steering pumps, the EHPS pumps require a 12-volt power supply. Most EHPS pumps will also require communication with an external module.


    Why use EHPS pumps over the traditional belt driven power steering pumps?
    Automobile manufacturers are favoring EHPS pumps because they result in better performance and fuel economy. EHPS pumps eliminate the belt and pulley rotational mass that a traditional pump would require.


    Can regular power steering fluid be used for EHPS systems?
    No. You must use the correct fluid specified in the O.E. service manual or owner’s manual of the vehicle being serviced.


    Can an EHPS pump be serviced?
    Most automobile manufactures do not recommend servicing individual components of an EHPS pump. These pumps are replaced as complete units.


    Where is an EHPS pump usually located?
    An EHPS pump has a different appearance than a traditional power steering pump and is usually mounted on the passenger side behind the front bumper.


    Will the power steering fluid need to be flushed?
    Yes. The hydraulic system must be flushed according to the O.E. service intervals. Failure do to so can cause premature damage to the EHPS pump and other power steering components.


    Will the system need to be bled after replacing an EHPS pump?
    Yes, a bleeding procedure must be performed, just like a traditional belt-driven power steering system.


    Core

    What is a core?

    A core is a used automotive part that is returned to the remanufacturer instead of being scrapped.

    Why return cores?

    Cores are literally at the “core” of the remanufacturing process, because they are the raw material used to start the remanufacturing process. That’s why remanufacturers buy cores back from customers, and they pay the most for good quality cores. If a core has too much damage in key areas, it may be unusable or require extra resources to process; therefore a reduced core payment may be awarded. This core policy explains potential deductions that may be taken from the core price if certain components are missing or damaged.

    What is remanufacturing?

    Remanufacturing is the process of taking used parts, completely disassembling and thoroughly cleaning them, replacing the worn components with original quality components, and restoring them to their original function. Every unit is 100% tested to ensure O.E. performance.

    Why “reman”?

    PRODUCTS - Reman captures used, durable goods like auto parts and puts them “back on the road” to new and sometimes better than new performance. Reman provides the opportunity for detection of common failure modes and incorporation of design improvements to prevent repeat failure.

    ECONOMY - Reman products cost consumers about 40% less than new. Reman products are one of the few “green” products that actually costs less than their “non-green” counterparts.


    ENVIRONMENTAL - Reman saves up to 86% of the energy required to build a new unit. Reman realizes Greenhouse Gas savings of up to 25 lbs. per unit over new. Reman saves up to 85% of the raw material required to produce a new unit by reusing existing products. Reman is even more sustainable than recycling, as product castings are preserved rather than melted down to raw material, saving energy and reducing emissions.

    Warranty Policy

    Installation & Tech Checks

    Core Policy

    ProTech Bulletins

    General

    pdm:general_part_type:
    Power Steering Pump
    pdm:general_product_condition:
    Remanufactured
    Life Cycle Status:
    Available to Order
    pdm:general_package_contents:
    Electronic Hydraulic Power Steering Pump; Sealing Kit
    pdm:general_package_weight:
    12.02 lb
    UPC:
    00884548041141
    pdm:general_e_waste:
    Yes

    Technical

    Cap Included:
    No
    Hose Port Type:
    O-Ring
    Outlet Attachment Type:
    Threaded
    Outlet Quantity:
    1
    Power Steering Outlet Thread Size:
    14x1.5
    Power Steering Pump Inlet Attachement Type:
    Barb
    Pulley Included:
    No
    Remote Reservoir:
    Yes
    Reservoir Included:
    Yes
    pdm:Filter Included:
    No
    pdm:Hose Port Type:
    O-ring
    pdm:Housing Material:
    Aluminum; Plastic
    pdm:Inlet Attachment Type:
    Barb
    pdm:Inlet Diameter:
    0.424 IN
    pdm:Inlet Diameter:
    10.75 MM
    pdm:Inlet Quantity:
    1
    pdm:Mounting Hardware Included:
    No
    pdm:Outlet Attachment Type:
    Threaded
    pdm:Outlet Quantity:
    1
    pdm:Outlet Thread Size:
    14x1.5
    pdm:Pulley Included:
    No
    pdm:Remote Reservoir:
    Yes
    pdm:Remote Reservoir Included:
    No
    pdm:Reservoir Cap Included:
    No
    pdm:Reservoir Included:
    Yes
    pdm:Type:
    Hydraulic