Description
Product
Specs
Buyers
Guide
FAQ's
Downloads
Remanufactured products only require 15-20% of the total energy and material it takes to manufacture new parts while keeping usable cores out of landfills.
CARDONE's skilled technicians and engineers can completely rebuild your part and return it to you, good as new. Learn More.
Product Description
CARDONE Remanufactured Mass Air Flow Sensors (MAFS) precisely track O.E. output curves and maintain specific tolerances to ensure accurate scan tool readings for proper operation. 100% re-soldering of critical components ensures superior electrical connections, eliminates intermittent failures and lengthens product life. With CARDONE Mass Air Flow Sensors (MAFS), you can expect smooth vehicle performance.
Complete the Check It Fits tool and confirm all information in the Fitment Details section above to ensure you select the right part for your application.
Metafield Product & Technical
What are the most common causes of MAF/VANE air flow sensor problems?
Over-voltage sources from relays, short circuited wiring, cracked printed circuit boards, moisture entering the unit through split air ducts, electrical connections and wiring, air intake obstructions or gas/oil fumes from the engine can cause failure. Check air filter and air ways for dirt or debris. Check for loose or faulty connectors and broken or faulty wiring. Be sure to check these to prevent damage to the replacement unit.How can a malfunctioning MAF/VANE air flow sensor affect my vehicles’ operation?
A malfunctioning MAF/VANE air flow sensor can cause any one or more of the following symptoms: hesitation, stalling, poor fuel economy or poor engine performance.What goes bad in MAF sensors?
The most common causes are: cracked circuit boards, burnt sensing elements, poor solder joints, deteriorated conformal coating, or loose printed circuit board components.How can I determine if the MAF/VANE air flow sensor is bad?
Visually inspect the sensor element in the MAF for damage or for a burnt smell. In the VANE AIRFLOW sensor, inspect the door for binding or for a burnt smell. Check for diagnostic trouble codes with a scanner.What goes bad in vane air flow type units?
The most common causes are: a worn vane assembly, a cracked housing, or a cracked printed circuit board. These conditions all require unit replacement.
Core
What is a core? A core is a used automotive part that is returned to the remanufacturer instead of being scrapped. Why return cores? Cores are literally at the “core” of the remanufacturing process, because they are the raw material used to start the remanufacturing process. That’s why remanufacturers buy cores back from customers, and they pay the most for good quality cores. If a core has too much damage in key areas, it may be unusable or require extra resources to process; therefore a reduced core payment may be awarded. This core policy explains potential deductions that may be taken from the core price if certain components are missing or damaged. What is remanufacturing? Remanufacturing is the process of taking used parts, completely disassembling and thoroughly cleaning them, replacing the worn components with original quality components, and restoring them to their original function. Every unit is 100% tested to ensure O.E. performance. Why “reman”? PRODUCTS - Reman captures used, durable goods like auto parts and puts them “back on the road” to new and sometimes better than new performance. Reman provides the opportunity for detection of common failure modes and incorporation of design improvements to prevent repeat failure.ECONOMY - Reman products cost consumers about 40% less than new. Reman products are one of the few “green” products that actually costs less than their “non-green” counterparts.
ENVIRONMENTAL - Reman saves up to 86% of the energy required to build a new unit. Reman realizes Greenhouse Gas savings of up to 25 lbs. per unit over new. Reman saves up to 85% of the raw material required to produce a new unit by reusing existing products. Reman is even more sustainable than recycling, as product castings are preserved rather than melted down to raw material, saving energy and reducing emissions.
Warranty Policy
Installation & Tech Checks
Core Policy
ProTech Bulletins
General
pdm:general_part_type:
Mass Air Flow Sensor
pdm:general_product_condition:
Remanufactured
Life Cycle Status:
Available to Order
pdm:general_package_contents:
Mass Air Flow Sensor; Instruction Sheet
pdm:general_package_weight:
1.25 lb
UPC:
00082617378307
pdm:general_e_waste:
Yes
Technical
Housing Color:
Black
Housing Included:
Yes
Mounting Hole Quantity:
2
Mounting Type:
Bolt-On
pdm:Bracket Included:
No
pdm:Color:
Black
pdm:Connector Gender:
Male
pdm:Connector Quantity:
1
pdm:Connector Shape:
Round
pdm:Grade Type:
Regular
pdm:Housing Included:
Yes
pdm:Housing Material:
Plastic
pdm:Inlet Connection Diameter:
86.36 MM
pdm:Inlet Connection Diameter:
3.4 IN
pdm:Mounting Bracket Included:
No
pdm:Mounting Hardware Included:
No
pdm:Mounting Hole Quantity:
2
pdm:Mounting Type:
Bolt-On; Hose Clamp
pdm:Outlet Connection Diameter:
83.3 MM
pdm:Outlet Connection Diameter:
3.4 IN
pdm:Sensor Type:
Resistor
pdm:Terminal Gender:
Male
pdm:Terminal Quantity:
6
pdm:Terminal Type:
Pin
pdm:Universal Or Specific Fit:
Specific
pdm:Wiring Harness Included:
No
General
Part Type:
Mass Air Flow Sensor
Product Condition:
Remanufactured
Lifecycle Status:
Available to Order
Package Contents:
Mass Air Flow Sensor, Instruction Sheet
Packaged Weight:
1.2500 lb
E-Waste:
Yes
Warranty:
1 Year/18,000 Mile
*A warranty must be returned to the parts supplier where the CARDONE product was
purchased and is subject to that part store's terms & conditions. If the parts retailer offers a
different warranty than the CARDONE warranty, the retailer’s policy will prevail.
Technical
Housing Color:
Black
Housing Included:
Yes
Housing Material:
Plastic
Mounting Hole Quantity:
2
Mounting Type:
Bolt-On
pdm:Bracket Included:
No
pdm:Color:
Black
pdm:Connector Gender:
Male
pdm:Connector Quantity:
1
pdm:Connector Shape:
Round
pdm:Grade Type:
Regular
pdm:Housing Included:
Yes
pdm:Housing Material:
Plastic
pdm:Inlet Connection Diameter:
86.36 MM
pdm:Inlet Connection Diameter:
3.4 IN
pdm:Mounting Bracket Included:
No
pdm:Mounting Hardware Included:
No
pdm:Mounting Hole Quantity:
2
pdm:Mounting Type:
Bolt-On; Hose Clamp
pdm:Outlet Connection Diameter:
83.3 MM
pdm:Outlet Connection Diameter:
3.4 IN
pdm:Sensor Type:
Resistor
pdm:Terminal Gender:
Male
pdm:Terminal Quantity:
6
pdm:Terminal Type:
Pin
pdm:Universal Or Specific Fit:
Specific
pdm:Wiring Harness Included:
No
