Description
Product
Specs
Buyers
Guide
FAQ's
Downloads
CARDONE's skilled technicians and engineers can completely rebuild your part and return it to you,
good as new. Learn More.
Product Description
All CARDONE 100% New Electronic Throttle Bodies are guaranteed to fit and function like the original due to our proprietary engineering standards. Each unit is built and tested as a complete assembly to ensure quick installation and reliable performance. All components match O.E., ensuring accurate air flow in all driving conditions and peak engine performance.
Complete the Check It Fits tool and confirm all information in the Fitment Details section above to ensure you select the right part for your application.
Product & Technical
Will I have to modify anything on the vehicle to install your new throttle body?
When installing the new electronic throttle body, there is no need to modify the vehicle for installation.Are your new throttle bodies the same design as O.E.?
The new electronic throttle body is engineered and manufactured to match the O.E. design.Is it OK to bypass the coolant hoses?
No, bypassing the coolant hoses is not recommended. There are cases where we sell units without coolant pipes, because we are following O.E. supersessions where the pipes have been removed. Instructions are provided for rerouting coolant hoses.Do all throttle bodies have an ice-breaker mode for extreme cold starts?
Not all throttle bodies have this feature, where the throttle valve is reversed from its normal movement by the control module, which breaks up any ice formation between the throttle bore and valve. This feature is based on application.What else does the throttle body control other than idle air bypass and acceleration throughout driving range?
The throttle body is also part of the cruise control, traction control, stability control, and pre-crash systems, as well as other systems that require engine torque management.What’s an electronic throttle body?
The electronic throttle body is a powertrain component that has a plate, motor, and integrated position sensors which are utilized to regulate the amount of air entering the engine by opening the throttle valve to a desired angle via commands from the vehicle’s powertrain control module or throttle actuator control module.What happens when an electronic throttle body fails?
When an electronic throttle body fails, the controlling module will illuminate the MIL/SES/CEL. The module will then activate a fail-safe mode operation and gradually reduce the engine’s speed back to an idle RPM.Is there anything that has to be done after installing the replacement throttle body?
A relearn calibration procedure is necessary after installation of replacement throttle body.What causes the electronic throttle body to fail?
The most common failure in an electronic throttle body is the integrated throttle position sensor. The ETB is equipped with high and low voltage reference throttle position sensor for redundancy. Either one of these sensors could fail, or possibly both.Can I purchase a throttle body with a bigger bore to increase horsepower and improve my throttle response?
Swapping your throttle body for one with a bigger bore is not recommended. The throttle bodies we sell are specific to the application.The O.E. throttle body has coolant hoses attached. What’s the purpose?
The purpose of the attached coolant hoses is to keep the throttle body warm by the transfer of heat from the coolant to the housing, preventing moisture from freezing between the throttle body bore and throttle valve during extreme cold temperatures.Do you sell throttle body spacers?
We do not sell throttle body spacers, nor do we recommend the use of a spacer.Is it OK to bypass the coolant hoses?
No, bypassing the coolant hoses is not recommended. There are cases where we sell units without coolant pipes, because we are following O.E. supersessions where the pipes have been removed. Instructions are provided for rerouting coolant hoses.Warranty Policy
Installation & Tech Checks
Core Policy
ProTech Bulletins
General
pdm:general_part_type:
Fuel Injection Throttle Body
pdm:general_product_condition:
New
Life Cycle Status:
Available to Order
pdm:general_package_contents:
Electronic Throttle Body; Instruction Sheet
pdm:general_package_weight:
2.24 lb
UPC:
00884548356009
pdm:general_e_waste:
Yes
pdm:general_warranty:
Limited Lifetime
*A warranty must be returned to the parts supplier where the CARDONE product
was
purchased and is subject to that part store's terms & conditions. If the parts retailer offers a
different warranty than the CARDONE warranty, the retailer’s policy will prevail.
Technical
Bore Diameter - Metric:
60 mm
Finish:
Natural
Fuel Injectors Included:
No
Fuel System Grade:
Regular
Fuel System Type:
Gas
Gasket or Seal Included:
Yes
Housing Color or Finish:
Natural
Inlet Diameter - Metric:
70 mm
Inlet Type:
Circle
Material:
Aluminum, Steel, Plastic
Outlet Diameter - Metric:
61 mm
Outlet Type:
Round
Spacer Included:
No
Throttle Body Actuation Type:
Electric
Venturi Quantity:
1
pdm:Adjustable:
No
pdm:Bore Diameter:
2.362 IN
pdm:Bore Diameter:
60.00 MM
pdm:Fuel Injectors Included:
No
pdm:Fuel System Grade:
Regular
pdm:Fuel System Type:
Gas
pdm:Gasket Or Seal Included:
Yes
pdm:Idle Air Control Motor Included:
No
pdm:Inlet Diameter:
70.00 MM
pdm:Inlet Diameter:
2.756 IN
pdm:Inlet Type:
Circle
pdm:Mounting Hardware Included:
No
pdm:Outlet Diameter:
61.00 MM
pdm:Outlet Diameter:
2.402 IN
pdm:Outlet Quantity:
1
pdm:Outlet Type:
Round
pdm:Terminal Type:
Blade
pdm:Throttle Body Finish:
Natural
pdm:Throttle Body Spacer Included:
No
pdm:Throttle Body Type:
Electric
pdm:Throttle Position Sensor Included:
Yes
pdm:Venturi Quantity:
1
