Customers: The transition from MyCARDONE to the new CARDONE.com is underway. Watch your email!

Fuel Injection Throttle Body - 67-0009

PART NUMBER:
67-0009

PART TYPE:
Fuel Injection Throttle Body
Fuel Injection Throttle Body - 67-0009
WHERE TO BUY
Click for more info Remanufactured products only require 15-20% of the total energy and material it takes to manufacture new parts while keeping usable cores out of landfills.
Click for more info CARDONE's skilled technicians and engineers can completely rebuild your part and return it to you, good as new. Learn More.

Product Description

Every CARDONE Remanufactured Electronic Throttle Body undergoes a proprietary disassembly, inspection and renewal process. Each component is meticulously evaluated and then renewed or replaced, depending on whether the component meets our stringent engineering standards. A proprietary cleaning process prevents the throttle bore surface from deformity, ensuring optimum airflow. Every unit is tested for all critical functions, including response time and air flow at multiple points to ensure peak performance.


  • Each unit is disassembled and meticulously inspected. Each component is inspected, remanufactured or replaced resulting in reliable and consistent performance.
  • A specialized component cleaning process prevents the throttle bore surface from being deformed, ensuring optimum air flow.
  • The high and low integrated throttle position sensors are tested to match O.E. characteristics throughout the entire operational range.
  • Final assemblies are tested for all critical functions, including response time and air flow at multiple points.
  • Each unit is guaranteed to function like the original.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
  • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

    • Product & Technical

    Core

    What is a core?

    A core is a used automotive part that is returned to the remanufacturer instead of being scrapped.

    Why return cores?

    Cores are literally at the “core” of the remanufacturing process, because they are the raw material used to start the remanufacturing process. That’s why remanufacturers buy cores back from customers, and they pay the most for good quality cores. If a core has too much damage in key areas, it may be unusable or require extra resources to process; therefore a reduced core payment may be awarded. This core policy explains potential deductions that may be taken from the core price if certain components are missing or damaged.

    What is remanufacturing?

    Remanufacturing is the process of taking used parts, completely disassembling and thoroughly cleaning them, replacing the worn components with original quality components, and restoring them to their original function. Every unit is 100% tested to ensure O.E. performance.

    Why “reman”?

    PRODUCTS - Reman captures used, durable goods like auto parts and puts them “back on the road” to new and sometimes better than new performance. Reman provides the opportunity for detection of common failure modes and incorporation of design improvements to prevent repeat failure.

    ECONOMY - Reman products cost consumers about 40% less than new. Reman products are one of the few “green” products that actually costs less than their “non-green” counterparts.


    ENVIRONMENTAL - Reman saves up to 86% of the energy required to build a new unit. Reman realizes Greenhouse Gas savings of up to 25 lbs. per unit over new. Reman saves up to 85% of the raw material required to produce a new unit by reusing existing products. Reman is even more sustainable than recycling, as product castings are preserved rather than melted down to raw material, saving energy and reducing emissions.

    Warranty Policy

    Installation & Tech Checks

    Core Policy

    ProTech Bulletins

    General

    pdm:general_part_type:
    Fuel Injection Throttle Body
    pdm:general_product_condition:
    Remanufactured
    Life Cycle Status:
    Available to Order
    pdm:general_package_contents:
    Electronic Throttle Body; Instruction Sheet
    pdm:general_package_weight:
    2.38 lb
    UPC:
    00884548122628
    pdm:general_e_waste:
    Yes

    Technical

    Gasket or Seal Included:
    No
    Housing Color or Finish:
    Gray/Unfinished
    Inlet Shape:
    Round
    Outlet Shape:
    Round
    Throttle Body Actuation Type:
    Electric
    Throttle Position Sensor Included:
    Yes
    pdm:Adjustable:
    No
    pdm:Bore Diameter:
    2.759 IN
    pdm:Bore Diameter:
    70 MM
    pdm:Connector Shape:
    Rectangular
    pdm:Fuel Injectors Included:
    No
    pdm:Fuel System Grade:
    Regular
    pdm:Fuel System Type:
    Gas
    pdm:Gaskets or Seal Included:
    No
    pdm:Idle Air Control Motor Included:
    No
    pdm:Inlet Diameter:
    3.153 IN
    pdm:Inlet Diameter:
    80 MM
    pdm:Inlet Type:
    Circle
    pdm:Mounting Hardware Included:
    No
    pdm:Outlet Diameter:
    2.799 IN
    pdm:Outlet Diameter:
    71 MM
    pdm:Outlet Quantity:
    1
    pdm:Outlet Type:
    Circle
    pdm:Terminal Type:
    Pin
    pdm:Throttle Body Finish:
    Natural
    pdm:Throttle Body Material:
    Plastic; Steel; Aluminum
    pdm:Throttle Body Spacer Included:
    No
    pdm:Throttle Body Type:
    Electric
    pdm:Throttle Position Sensor Included:
    Yes
    pdm:Venturi Quantity:
    1