Description
Product
Specs
Buyers
Guide
FAQ's
Downloads
Remanufactured products only require 15-20% of the total energy and material it takes to manufacture new parts while keeping usable cores out of landfills.
Product Description
CARDONE Remanufactured Prop Shafts are engineered using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Additionally, all CARDONE Prop Shafts are 100% dynamically balanced, resulting in vibration-free performance at all speeds.
Complete the Check It Fits tool and confirm all information in the Fitment Details section above to ensure you select the right part for your application.
Metafield Product & Technical
How is a prop shaft balanced?
This procedure entails the distribution of mass in the rotating prop shaft. The shaft is measured and altered where necessary to ensure that vibration does not occur during operation.Are your shafts balanced? Why is it necessary?
Each shaft is precisely balanced before boxing. Prop shaft balance is necessary for proper driveline operation. An unbalanced shaft can cause premature wear on other major components such as your transmission and rear differential.What is a universal joint?
A universal joint is designed to allow prop shafts to move with suspension travel while the shaft is moving. This allows power to be transmitted when the prop shaft is angled between the transmission and differential.What causes prop shaft vibration?
The most common causes of prop shaft vibrations are worn joints, an unbalanced drive shaft, poor joint lubrication, and a bent or twisted shaft.What is prop shaft phasing?
Phasing is a used to describe the alignment of the yokes with each other at both ends of the prop shaft. The phase angle is the rotational position of each yoke on a prop shaft.Do all vehicles have prop shafts?
Not all vehicles will have a prop shaft. Prop shafts are most commonly found on all-wheel-drive and rear- wheel-drive vehicles.Warranty Policy
Installation & Tech Checks
Core Policy
ProTech Bulletins
General
pdm:general_part_type:
Drive Shaft
pdm:general_product_condition:
New
Life Cycle Status:
Available to Order
pdm:general_package_contents:
Prop Shaft; Instruction Sheet
pdm:general_package_weight:
27.00 lb
UPC:
00884548212916
pdm:general_e_waste:
No
Technical
Greasable:
Yes
Length - Imperial:
62.80 in
Length - Metric:
1595 mm
Measurement Method:
Measurement taken from end of flange face to end of flange face
Shaft Material:
Steel
Tubing Outer Diameter - Imperial:
2.50 in
Tubing Outer Diameter - Metric:
64 mm
pdm:CV Joints Included:
Yes
pdm:Compressed Length:
1595.00 MM
pdm:Compressed Length:
62.80 IN
pdm:Drive Shaft Type:
Universal Joint
pdm:End 1 Type:
Bolt On
pdm:End 2 Type:
Bolt On
pdm:Grade Type:
Regular
pdm:Greasable:
No
pdm:Grease Fitting Included:
No
pdm:Phased:
Yes
pdm:Pre-Greased:
Yes
pdm:Shaft Diameter:
2.50 IN
pdm:Shaft Diameter:
63.50 MM
pdm:Shaft Material:
Steel
pdm:Slip Yoke:
No
pdm:Universal Joints Included:
Yes
General
Part Type:
Driveshaft / Prop Shaft
Product Condition:
Remanufactured
Lifecycle Status:
Available to Order
Packaged Weight:
27.0000 lb
E-Waste:
No
Warranty:
1 Year/18,000 Mile
*A warranty must be returned to the parts supplier where the CARDONE product was
purchased and is subject to that part store's terms & conditions. If the parts retailer offers a
different warranty than the CARDONE warranty, the retailer’s policy will prevail.
Technical
Greasable:
Yes
Length - Imperial:
62.80 in
Length - Metric:
1595 mm
Measurement Method:
Measurement taken from end of flange face to end of flange face
Shaft Material:
Steel
Tubing Outer Diameter - Imperial:
2.50 in
Tubing Outer Diameter - Metric:
64 mm
pdm:CV Joints Included:
Yes
pdm:Compressed Length:
1595.00 MM
pdm:Compressed Length:
62.80 IN
pdm:Drive Shaft Type:
Universal Joint
pdm:End 1 Type:
Bolt On
pdm:End 2 Type:
Bolt On
pdm:Grade Type:
Regular
pdm:Greasable:
No
pdm:Grease Fitting Included:
No
pdm:Phased:
Yes
pdm:Pre-Greased:
Yes
pdm:Shaft Diameter:
2.50 IN
pdm:Shaft Diameter:
63.50 MM
pdm:Shaft Material:
Steel
pdm:Slip Yoke:
No
pdm:Universal Joints Included:
Yes
