Customers: The transition from MyCARDONE to the new CARDONE.com is underway. Watch your email!

Disc Brake Caliper - 2C-4072

PART NUMBER:
2C-4072

PART TYPE:
Disc Brake Caliper
Disc Brake Caliper - 2C-4072
WHERE TO BUY

Product Description

Our new calipers are manufactured using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. As a direct-fit component, our new zinc coated calipers provide hassle-free installation and long-term reliability.


  • Engineered to meet or exceed O.E. performance.
  • Zinc plating offers a silver O.E.-like finish.
  • Ideal for commercial use as well as performance vehicles.
  • Every unit is 100% tested to ensure reliable performance.
  • No core return required.

    • Product & Technical

    Can I switch out a Phenolic Piston Caliper for a Steel Piston Caliper or vice versa?
    Not recommended. The O.E. manufacturers specified steel or phenolic pistons based on the intended use of the vehicle. It is recommended that the installer follow the manufacturer’s recommendations.


    What type of fluid should I use: DOT 3, DOT 4, or DOT 5?
    As a rule, always use brake fluid recommended by O.E. The fluid type is stamped on the master cylinder reservoir lid. Always use new fluid in a sealed container.


    Could calipers be the cause of a low brake pedal?
    A symptom of a low brake pedal is usually caused by air in the system, misadjusted rear brake shoes, deteriorated brake hose(s) or a defective master cylinder.


    Car pulls to one side during braking. Why?
    Inspect both calipers for binding or sticky slides or pins. Also ensure that brake hoses are not collapsed or restricted and inspect steering/suspension components for proper operation.


    Brakes squeal all of the time. What's causing the squeal?
    Brake squeal can be caused by improper installation of the brake pads, improperly installed brake hardware and improper brake rotor finish.


    What type of grease is used on floating caliper mounting pins?
    A silicone grease is used on floating caliper mounting pins.


    Do all of your Calipers come with the new hardware and a mounting bracket for installation?
    New hardware is included with all of our Calipers however the mounting bracket is an added option depending on part number and application. Mounting Brackets are also sold separately for most applications.


    Warranty Policy

    Installation & Tech Checks

    Core Policy

    ProTech Bulletins

    General

    pdm:general_part_type:
    Disc Brake Caliper
    pdm:general_product_condition:
    New
    Life Cycle Status:
    Obsolete
    pdm:general_package_contents:
    Caliper; Instruction Sheet; Hardware Kit
    pdm:general_package_weight:
    7.25 lb
    UPC:
    00082617884877
    pdm:general_e_waste:
    No
    pdm:general_warranty:
    Limited Lifetime
    *A warranty must be returned to the parts supplier where the CARDONE product was purchased and is subject to that part store's terms & conditions. If the parts retailer offers a different warranty than the CARDONE warranty, the retailer’s policy will prevail.

    Technical

    Bleeder Port Size:
    M10x1.5
    Color:
    Silver
    Finish:
    Zinc Plated
    Inlet Port Size:
    M10x1.5
    Mounting Bolts Included:
    Yes
    Pads Included:
    No
    Piston Material:
    Steel
    Piston Quantity:
    1
    Piston Size OD - Imperial:
    2.50 in
    Piston Size OD - Metric:
    63.40 mm
    pdm:Abutment Clips Included:
    No
    pdm:Anti-Rattle Spring Included:
    Yes
    pdm:Bleeder Screw Included:
    Yes
    pdm:Bleeder Screw Quantity:
    1
    pdm:Bleeder Thread Size:
    M10x1.5
    pdm:Bracket Included:
    No
    pdm:Caliper Color:
    Silver
    pdm:Caliper Finish:
    Zinc Plated
    pdm:Caliper Slides Included:
    Yes
    pdm:Caliper Type:
    Floating
    pdm:Disc Brake Caliper Casting Material:
    Cast Iron
    pdm:Grade Type:
    Regular
    pdm:Inlet Fitting Type:
    Banjo
    pdm:Inlet Port Size:
    M10x1.5
    pdm:Mounting Bolt Included:
    Yes
    pdm:Mounting Bracket Included:
    No
    pdm:Mounting Hardware Included:
    Yes
    pdm:Mounting Hole Diameter:
    0.618 IN
    pdm:Mounting Hole Thread Diameter:
    0.618 IN
    pdm:Pad Wear Sensor Included:
    Yes
    pdm:Pads Included:
    No
    pdm:Piston Diameter:
    63.4 MM
    pdm:Piston Diameter:
    2.5 IN
    pdm:Piston Material:
    Steel
    pdm:Piston Quantity:
    1
    pdm:Rust Resistant Coating:
    Yes